کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7891584 | 1509895 | 2015 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Tyranno ZMI fiber/TiSi2-Si matrix composites for high-temperature structural applications
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
A Tyranno ZMI fiber/TiSi2-Si matrix composite was fabricated via melt infiltration (MI) of a Si-16at%Ti alloy at 1375 °C under vacuum. The Si-Ti alloy was used as an infiltrant to conduct MI processing below 1400 °C and inhibit the strength degradation of the amorphous SiC fibers. The alloy matrix formed was dense and comprised primarily of TiSi2-Si eutectic structures. The TiSi2-Si matrix composite melt-infiltrated at 1375 °C showed a pseudo-plastic tensile stress-strain behavior followed by final fracture at â¼290 MPa and â¼0.9% strain. When the MI temperature was increased to 1450 °C, however, substantial reduction in the stiffness and ultimate strength occurred under tensile loading. Microstructural observations revealed that these degradations were attributed to the damages that occurred on the reinforcing fibers and pyrolytic carbon interfaces during the MI process. The present experimental results clearly demonstrated the effectiveness of the low-temperature MI process in strengthening Tyranno ZMI fiber composites and reducing the processing cost.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Part A: Applied Science and Manufacturing - Volume 76, September 2015, Pages 102-109
Journal: Composites Part A: Applied Science and Manufacturing - Volume 76, September 2015, Pages 102-109
نویسندگان
Takuya Aoki, Toshio Ogasawara,