کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7891592 | 1509895 | 2015 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modeling
ترجمه فارسی عنوان
ریزپردازنده های سه بعدی سه بعدی با استفاده مستقیم از نانوکامپوزیت های نانولوله های پلیمری / کربن با استفاده از طریق مدل سازی رسوب مایع
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
چکیده انگلیسی
In this work, a new three-dimensional (3D) printing system based on liquid deposition modeling (LDM) is developed for the fabrication of conductive 3D nanocomposite-based microstructures with arbitrary shapes. This technology consists in the additive multilayer deposition of polymeric nanocomposite liquid dispersions based on poly(lactic acid) (PLA) and multi-walled carbon nanotubes (MWCNTs) by means of a home-modified low-cost commercial benchtop 3D printer. Electrical and rheological measurements on the nanocomposite at increasing MWCNT and PLA concentrations are used to find the optimal processing conditions and the printability windows for these systems. In addition, examples of conductive 3D microstructures directly formed upon 3D printing of such PLA/MWCNT-based nanocomposite dispersions are presented. The results of our study open the way to the direct deposition of intrinsically conductive polymer-based 3D microstructures by means of a low-cost LDM 3D printing technique.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Part A: Applied Science and Manufacturing - Volume 76, September 2015, Pages 110-114
Journal: Composites Part A: Applied Science and Manufacturing - Volume 76, September 2015, Pages 110-114
نویسندگان
Giovanni Postiglione, Gabriele Natale, Gianmarco Griffini, Marinella Levi, Stefano Turri,