Preparation and characterization of water-borne epoxy shape memory composites containing silica

Shape memory silica/epoxy composites were successfully prepared by hydrolysis of tetraethoxysilane (TEOS) within the epoxy matrix via latex, freeze-drying, and hot-press molding method. The silane coupling agent 3-triethoxysilylpropylamine (KH550) was introduced to improve the interfacial properties between the in-situ generated silica particle and epoxy matrix. The morphology structure and the effect of the content of the in-situ formed silica on the mechanical and shape memory properties of the silica/epoxy composites were studied. The experimental results indicated that the silica particles were homogenously dispersed and well incorporated into the epoxy matrix. Significant improvements were achieved in the mechanical property of the organic-inorganic hybrid materials. The silica/epoxy composites exhibited high shape recovery and fixity ratio approximately 100% even after 10 thermo-mechanical cycles.