کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7892219 | 1509907 | 2014 | 33 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
The development and scalability of a high strength, damage tolerant, hybrid joining scheme for composite-metal structures
ترجمه فارسی عنوان
توسعه و مقیاس پذیری یک استحکام بالا، سازه آسیب پذیر، پیوستن هیبرید برای سازه های فلزی کامپوزیت
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
ترجمه چکیده
مفاصل پیشرفته هیبرید که شامل یک آرایه مخصوص طراحی شده از پین های مقیاس بزرگ که تقویت کننده اتصال مکانیکی را فراهم می کنند، برای رسیدگی به چالش های مرتبط با اتصال کامپوزیت تقویت شده فیبر به فلزات توسعه داده شده است. در این مقاله، ویژگی های مشترک مشترک، از جمله قدرت، خستگی مکانیکی، تحمل آسیب و دوام، مورد بررسی و بحث قرار گرفته است. نتایج نشان می دهد که با اتصالات پیشرفته هیبریدی امکان دستیابی به مزایای سیستم های متصل شده و پیچ و مهره وجود دارد اما با تقریبا صفر وزن خالص یا احتمالا کاهش وزن به عنوان افزایش عملکرد طرح هیبریدی می تواند مفاصل کوچکتر را تسهیل کند. نویسندگان همچنین نتایج اولیه از یک آزمایش جامع تولید و مقیاس پذیری را ارائه می دهند و نشان می دهند که تولید کم هزینه های تولید مقاطع هیبریدی در حال حاضر امکان پذیر است.
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
چکیده انگلیسی
Advanced hybrid joints, which incorporate a specially designed array of macro-scale pins that provide mechanical interlocking reinforcement, have been developed in order to address the challenges associated with joining fibre reinforced composites to metals. In the present work, important joint characteristics including strength, mechanical fatigue, damage tolerance and durability have been studied and discussed. The results indicate that with advanced hybrid joints it is possible to achieve the benefits of the respective bonded and bolted systems but with virtually zero net weight gain, or conceivably a weight reduction as the increased performance of the hybrid scheme could facilitate smaller joints. The authors also present initial results from a comprehensive manufacturing and scalability trial, and demonstrate that low-cost, large-scale manufacture of hybrid joints is now feasible.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Composites Part A: Applied Science and Manufacturing - Volume 64, September 2014, Pages 11-24
Journal: Composites Part A: Applied Science and Manufacturing - Volume 64, September 2014, Pages 11-24
نویسندگان
D.P. Graham, A. Rezai, D. Baker, P.A. Smith, J.F. Watts,