کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7898596 | 1510137 | 2018 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Breath figures decorated silica-based ceramic surfaces with tunable geometry from UV cross-linkable polysiloxane precursor
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سرامیک و کامپوزیت
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Little has been published so far on the fabrication of porous ceramic films by using the Breath Figure method. In this work we explored the Breath Figure method to obtain ceramics with patterned surfaces. A UV cross-linkable polysiloxane was used to produce Breath Figures with tunable pore size. Pores formation, in terms of size and distribution on the polysiloxane films, were studied as a function of the concentration of the starting solution and time before UV irradiation. The polymeric breath figures were then pyrolyzed in controlled atmosphere to obtain, through the polymer-derived ceramic, PDCs, route the corresponding ceramic preserving the original porous surface. Pyrolysis under different gases, in particular air, nitrogen and ammonia, allows obtaining films of three different ceramic materials: silicon dioxide, SiO2, silicon oxycarbide, SiOC and silicon oxynitride, SiON respectively.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of the European Ceramic Society - Volume 38, Issue 4, April 2018, Pages 1320-1326
Journal: Journal of the European Ceramic Society - Volume 38, Issue 4, April 2018, Pages 1320-1326
نویسندگان
Cristiano Carlomagno, Giorgio Speranza, Pranesh Aswath, Gian Domenico Sorarù, Claudio Migliaresi, Devid Maniglio,