کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7902678 1510455 2014 5 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Evaluation of demolding force for glass-imprint process
ترجمه فارسی عنوان
ارزیابی نیروی تخلیه برای فرآیند چاپ شیشه
کلمات کلیدی
ترجمه چکیده
رفتار خنثی سازی عینک اکسید از قالب ها با استفاده از یک قالب مخصوص توسعه یافته مجهز به سلول بار و حسگر سرو موتور بسیار مورد تحسین قرار گرفته است. نقطه تخلیه و نیروی تخلیه، با نیروی کششی اعمال شده به محور فشار، و همچنین سرعت خنک شدن، افزایش می یابد. به خصوص نیروی تخلیه شدیدا تحت تأثیر میزان خنک کننده قرار گرفت وقتی که نقطه تخلیه در نزدیکی دمای دمای انتقال شیشه قرار گرفت. این نتایج یک جهت مفید برای فرآیندهای بسیار دقیق قالب گیری شیشه ای و شیشه ای را ارائه می دهد.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد سرامیک و کامپوزیت
چکیده انگلیسی
Demolding behavior of oxide glasses from molds was experimentally analyzed using a specially developed molding set up equipped with highly sensitive load cell and servomotor. The demolding point and the demolding force were apt to increase with the tensile force applied to the pressing axis, and also to the cooling rate. Especially the demolding force was strongly affected by the cooling rate when the demolding point was located near the glass transition temperature region. These results offer a useful direction for highly accurate glass-molding and glass-imprint processes.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Non-Crystalline Solids - Volume 383, 1 January 2014, Pages 66-70
نویسندگان
, , , ,