کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
791942 | 1466784 | 2006 | 9 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: An experimental study of tool wear and cutting force variation in the end milling of Inconel 718 with coated carbide inserts An experimental study of tool wear and cutting force variation in the end milling of Inconel 718 with coated carbide inserts](/preview/png/791942.png)
Inconel 718 is a difficult-to-cut nickel-based superalloy commonly used in aerospace industry. This paper presents an experimental study of the tool wear propagation and cutting force variations in the end milling of Inconel 718 with coated carbide inserts. The experimental results showed that significant flank wear was the predominant failure mode affecting the tool life. The tool flank wear propagation in the up milling operations was more rapid than that in the down milling operations. The cutting force variation along with the tool wear propagation was also analysed. While the thermal effects could be a significant cause for the peak force variation within a single cutting pass, the tool wear propagation was believed to be responsible for the gradual increase of the mean peak force in successive cutting passes.
Journal: Journal of Materials Processing Technology - Volume 180, Issues 1–3, 1 December 2006, Pages 296–304