کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
793456 | 902425 | 2009 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of milling and reinforcement on mechanical properties of nanostructured magnesium composite
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Recycled Mg chips were used to synthesize nanostructured Mg composite of Mg–5 wt%Al reinforced with x wt% (x = 1, 2 and 5) in-situ formed AlN powder. Mechanical milling was employed to produce the composite powder of crystalline size 30–43 nm. The mechanically milled (MMed) powders were subjected to uniaxial pressing, sintering and hot extrusion processes to produce bulk solid samples. After sintering at 400 °C and hot extrusion at 350 °C, the crystalline size of the composite samples still remains in nanometer range from 52 to 84 nm. The effect of milling and the percentage of reinforced AlN on the mechanical properties such as tensile strength and ductility were discussed with the general explanation of deformation mechanisms involved.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 209, Issue 9, 1 May 2009, Pages 4439–4443
Journal: Journal of Materials Processing Technology - Volume 209, Issue 9, 1 May 2009, Pages 4439–4443
نویسندگان
Maung Aye Thein, L. Lu, M.O. Lai,