کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7935500 1513055 2018 9 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Wind tunnel protocol to study the effects of anti-soiling and anti-reflective coatings on deposition, removal, and accumulation of dust on photovoltaic surfaces and consequences for optical transmittance
ترجمه فارسی عنوان
پروتکل تونل باد برای بررسی اثرات پوشش های ضد خش و ضد انعکاسی بر رسوب، حذف و تجمع گرد و غبار روی سطوح فتوولتائیک و پیامدهای آن برای انتقال نور
کلمات کلیدی
پوشش ضد نفوذ، پوشش ضد انعکاسی، گرد و خاک، سطح فتوولتائیک، تونل باد،
ترجمه چکیده
پروتکل تونل باد ارائه شده است که اجازه می دهد تا مطالعه راندمان پوشش های ضد خش و ضد انعکاسی در شرایط خشک شدن خشک. پوشش ضد نفوذ به منظور کاهش تجمع گرد و غبار در ماژول های فتوولتائیک و دیگر سطوح طراحی شده است. تجمع گرد و غبار نتیجه تلفیقی رسوب (یا رسوب) و حذف سینژنتیک یا پس ژنتیکی است. در این زمینه مقدار گرد و غبار موجود در سطح فتوولتائیک همیشه نتیجه انباشت است. این پروتکل به افراد اجازه می دهد تا به طور جداگانه به بررسی اثرات پوشش های ضد خش و ضد انعکاسی بر فرایند رسوب گرد و غبار و گرد و غبار بپردازند تا کارایی خاص پوشش ها نسبت به شیشه های پوشش داده شده بهتر شود. با استفاده از تونل باد گرد و غبار، گرد و غبار و اندازه گیری گرد و غبار تحت شرایط شبه طبیعی با سطوح و سطوح بدون پوشش ضد نفوذ انجام شد. اندازه گیری های انتقال نوری به منظور تعیین تاثیر پوشش های ضد خش و ضد انعکاسی بر میزان عبور نور از سطوح آلوده گرد و غبار انجام شد. ما پروتکل را با مقایسه سطوح پوشش داده شده با ضد خارش و ضد انعکاسی با سطوح بدون پوشش یکسان نشان می دهیم. پوشش ضد آلودگی که در این مطالعه مورد آزمایش قرار گرفت، قابلیت دوگانه دارد زیرا دارای خواص ضد خش و ضد انعکاسی است. نتایج نشان داد که پوشش های آزمایش شده بر رسوب گرد و غبار تاثیر نمی گذارد، اما آنها تاثیر قابل توجهی بر حذف گرد و غبار داشتند که از یک سرعت باد پایین تر شروع شده و سطح را سریع تر نسبت به سطح پوشش داده شده پاک کرد. علاوه بر این، پوشش ضد انفجار از پوشش ضد انعکاسی نسبت به سرعت باد که در آن برداشت گرد و غبار آغاز می شود، بیش از پیش بهبود یافته است، که نشان می دهد که چسبندگی گرد و غبار روی پوشش ضد انسداد پایین تر است. انتقال بار همیشه برای سطوح پوشش داده شده بالاتر از سطح پوشش داده شده بود، اما از نظر پوشش سطوح (انتقال بیش از حد) کاهش می یابد، زیرا سطوح شیشه ای با گرد و غبار آلوده تر می شود.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی انرژی انرژی های تجدید پذیر، توسعه پایدار و محیط زیست
چکیده انگلیسی
A wind tunnel protocol is presented that allows to study the efficiency of anti-soiling and anti-reflective coatings under dry soiling conditions. Anti-soiling coatings are intended to reduce the accumulation of dust on photovoltaic modules and other surfaces. Dust accumulation is the combined result of sedimentation (or deposition) and syngenetic or post-genetic removal. In the field, the amount of dust present on a photovoltaic surface is always the result of accumulation. The protocol allows one to study the effects of anti-soiling and anti-reflective coatings on the processes of dust deposition and dust removal separately so that the specific operation of the coatings in comparison to uncoated glass can be better understood. Using an aeolian dust wind tunnel, dust deposition and dust removal measurements were performed under quasi-natural conditions on surfaces with and surfaces without an anti-soiling coating. Optical transmittance measurements were performed to determine the impact of anti-soiling and anti-reflective coatings on the amount of light passing through dust-polluted surfaces. We illustrate the protocol by comparing anti-soiling and anti-reflective coated surfaces with identical uncoated surfaces. The anti-soiling coating that was tested in this study has a dual functionality as it has both anti-soiling and anti-reflective properties. Results showed that the tested coatings did not affect the sedimentation of dust, but they did have a significant effect on dust removal, which started at a lower wind speed and cleaned the surface more rapidly compared to the uncoated surface. Additionally, the anti-soiling coating outperformed the anti-reflective coating regarding the wind speed at which dust removal started, indicating that dust adhesion forces on the anti-soiling coating are lower. Transmittance was always higher for the coated surfaces than for the uncoated surface, but the benefit of the coatings (higher transmittance) decreased as the glass surfaces became more polluted with dust.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Solar Energy - Volume 163, 15 March 2018, Pages 131-139
نویسندگان
,