کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7952015 | 1513705 | 2018 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microstructure evolution and mechanical properties of linear friction welded S31042 heat-resistant steel
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
شیمی مواد
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Microstructure evolution and mechanical properties of linear friction welded S31042 heat-resistant steel Microstructure evolution and mechanical properties of linear friction welded S31042 heat-resistant steel](/preview/png/7952015.png)
چکیده انگلیسی
S31042 heat-resistant steel was joined by linear friction welding (LFW) in this study. The microstructure and the mechanical properties of the LFWed joint were investigated by optical microscopy, scanning electronic microscopy, transmission electron microscopy, hardness test and tensile test. A defect-free joint was achieved by using LFW under reasonable welding parameters. The dynamic recrystallization of austenitic grains and the dispersed precipitation of NbCrN particles resulting from the high stress and high temperature in welding, would lead to a improvement of mechanical property of the welded joint. With increasing the distance from the weld zone to the parent metal, the austenitic grain size gradually increases fromââ¼1 μm to â¼150 μm, and the microhardness decreases from 301 HV to 225 HV. The tensile strength (about 731 MPa) of the welded joint is comparable to that of the S31042 in the solution-treated state.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Science & Technology - Volume 34, Issue 4, April 2018, Pages 653-659
Journal: Journal of Materials Science & Technology - Volume 34, Issue 4, April 2018, Pages 653-659
نویسندگان
Yanmo Li, Yongchang Liu, Chenxi Liu, Chong Li, Zongqing Ma, Yuan Huang, Zumin Wang, Wenya Li,