کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7952105 | 1513708 | 2018 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Solid state crack repair by friction stir processing in 304L stainless steel
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
شیمی مواد
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
Friction stir processing (FSP) was investigated as a method of repairing cracks in 12Â mm thick 304L stainless steel plate. Healing feasibility was demonstrated by processing a tapered crack using a PCBN/W-Re tool with a 25Â mm diameter shoulder and a pin length of 6.4Â mm. The experiment showed that it was possible to heal a crack that begins narrow and then progressively grows up to a width of 2Â mm. Bead on plate experiments were used to find the best parameters for creating a consolidated stir zone with the least amount of hardness difference compared to the base metal. Grain refinement in some specimens resulted in much higher stir zone hardness, compared to base metal. A plot of grain size versus microhardness showed a very strong inverse correlation between grain size and hardness, as expected from the Hall-Petch relationship. Corrosion testing was carried out in order to evaluate the effect of FSP on potential sensitization of the stir zone. After 1000Â h of intermittent immersion in 3.5% saline solution at room temperature it was found that no corrosion products formed on the base material controls or on any of the friction stir processed specimens.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Science & Technology - Volume 34, Issue 1, January 2018, Pages 140-147
Journal: Journal of Materials Science & Technology - Volume 34, Issue 1, January 2018, Pages 140-147
نویسندگان
C. Gunter, M.P. Miles, F.C. Liu, T.W Nelson,