کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
795731 1466776 2007 7 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
Modelling of surface finish and tool flank wear in turning of AISI D2 steel with ceramic wiper inserts
چکیده انگلیسی

Tool nose design affects the surface finish and productivity in finish hard turning processes. Surface finishing and tool flank wear have been investigated in finish turning of AISI D2 steels (60 HRC) using ceramic wiper (multi-radii) design inserts. Multiple linear regression models and neural network models are developed for predicting surface roughness and tool flank wear. In neural network modelling, measured forces, power and specific forces are utilized in training algorithm. Experimental results indicate that surface roughness Ra values as low as 0.18–0.20 μm are attainable with wiper tools. Tool flank wear reaches to a tool life criterion value of VBC = 0.15 mm before or around 15 min of cutting time at high cutting speeds due to elevated temperatures. Neural network based predictions of surface roughness and tool flank wear are carried out and compared with a non-training experimental data. These results show that neural network models are suitable to predict tool wear and surface roughness patterns for a range of cutting conditions.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Materials Processing Technology - Volume 189, Issues 1–3, 6 July 2007, Pages 192–198
نویسندگان
, , , ,