کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
795761 | 1466776 | 2007 | 9 صفحه PDF | دانلود رایگان |
![عکس صفحه اول مقاله: Metal flow in wedge indentation of V- and W-shaped tools Metal flow in wedge indentation of V- and W-shaped tools](/preview/png/795761.png)
The metal flow in the wedge indentation of V- and W-shaped tools into a ductile material is investigated experimentally. The metal flow localizes near the wedge and forms the raised lip with a sharp edge in the wedge indentation into A1050-H. On the other hand, the metal flow that is displaced under the indenter is absorbed into the elastically deformed area of the surrounding material in the wedge indentation into A1050-O. There exists the extent of the metal flow under the tip of the sharp wedge. The extent of plastically deformed area in the wedge indentation into A1050-O is broader than that in the wedge indentation into A1050-H. The metal flow in wedge indentation is also analyzed by the finite element method. The calculated results of wedge indentation by FEM agree well with experimental ones.
Journal: Journal of Materials Processing Technology - Volume 189, Issues 1–3, 6 July 2007, Pages 392–400