کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7969172 | 1514346 | 2018 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Characterization of microtexture of 316L stainless steel fiber after multi-pass drawing by electron backscatter diffraction
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
The microstructure and microtexture of 316L stainless steel fibers (SSFs) after multi-pass cold drawing with intermediate heat treatment were investigated in this study. The crystalline phases of SSFs were identified and quantified using X-ray diffraction (XRD) analysis. Grain orientation and boundary characterization in the mantle and core regions of drawing direction (DD) were analyzed through electron backscatter diffraction (EBSD). The coincident site lattice approach provides beneficial information for defining twin boundary and analyzing the orientation relationship between neighboring grains on the Σ3 segment. Three crystalline phases, γ, α, and Ï, could be seen in XRD profiles. The formation mechanism of deformation twins was found, and two types of twin boundaries were observed in the drawn fibers by EBSD. The twin boundary generated between a {112}ã111ã grain and a ã100ã//DD grain is believed to nucleate at a high-angle grain boundary and then bulge into the copper grain.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Characterization - Volume 141, July 2018, Pages 338-347
Journal: Materials Characterization - Volume 141, July 2018, Pages 338-347
نویسندگان
Shih-Ju Huang, Liuwen Chang, Tien-Wei Shyr,