کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7970684 | 1514389 | 2014 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microstructure-property characterization of a friction-stir welded joint between AA5059 aluminum alloy and high density polyethylene
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Aluminum alloys and high density polyethylene are utilized in a wide variety of industrial applications. In the present work the feasibility of friction stir butt welding between AA5059 alloy and high density polyethylene sheets is examined. The bonding mechanism, joint strength, and microhardness are considered in this study. Various welding parameters and tool alignment were investigated until sound joints were achieved by positioning approximately 85% of the rotating tool in the aluminum material on the advancing side (1.4Â mm offset) at constant spindle speed and traverse speed of 710Â rpm and 63Â mm/min, respectively. The results indicate that AA5059 aluminum and high density polyethylene sheets can be successfully joined with a combination of secondary bonding and mechanical interlocking of the materials, which provides a potential alternative to adhesive bonding or mechanical fastening.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Characterization - Volume 98, December 2014, Pages 73-82
Journal: Materials Characterization - Volume 98, December 2014, Pages 73-82
نویسندگان
F. Khodabakhshi, M. Haghshenas, S. Sahraeinejad, J. Chen, B. Shalchi, J. Li, A.P. Gerlich,