کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7971638 | 1514611 | 2018 | 22 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Fabrication of high-strength Mg-Y-Sm-Zn-Zr alloy by conventional hot extrusion and aging
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
A high-strength Mg-7Y-5Sm-0.5Zn-0.3Zr alloy was developed successfully by hot extrusion and subsequent aging treatment. The results showed that the as-solutionized alloy mainly contained α-Mg matrix and 14H LPSO phase distributed at grain boundaries. Lamellar LPSO and γⲠphases were dynamically precipitated during hot extrusion and retained after artificial aging treatment at 200°C. After peak-aged treatment, the alloy exhibited excellent mechanical properties with ultimate tensile strength of 465â¯MPa, 0.2% proof stress of 413â¯MPa and elongation to failure of 6.5% at room temperature. The high yield strength was attributed to the combined action of 14H-LPSO phase, basal γⲠprecipitates and dense distribution of βⲠprecipitates at prismatic plane.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 732, 8 August 2018, Pages 178-185
Journal: Materials Science and Engineering: A - Volume 732, 8 August 2018, Pages 178-185
نویسندگان
Shaoyuan Lyu, Wenlong Xiao, Ruixiao Zheng, Fang Wang, Tong Hu, Chaoli Ma,