کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7971783 | 1514612 | 2018 | 22 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
High temperature characteristics of Al2024/SiC metal matrix composite fabricated by friction stir processing
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
In the present study, friction stir processing (FSP) is used for the synthesis of an aluminum metal matrix composite (MMC) reinforced by SiC particles. MMC specimens with reinforced microstructures exhibited significant improvement in hardness (near 50%). Isothermal uniaxial tensile tests were employed for the as-received, friction stir processed and composite microstructures at ambient and high temperatures under strain rates ranging from 10â2 to 10â4 sâ1 to investigate the effect of deformation rate on the mechanical behavior. At ambient temperature, notable improvement of the yield strength was observed reaching about 240% of the as-received samples while the ductility was reduced near to 4%. Elevated temperature flow curves were perceptibly sensitive to strain rate, especially for FSPed and MMC samples. Fracture surface observations hinted at the distribution of second phase particles along with possible damage mechanisms.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 731, 25 July 2018, Pages 487-494
Journal: Materials Science and Engineering: A - Volume 731, 25 July 2018, Pages 487-494
نویسندگان
Ali Hosseinzadeh, Guney Guven Yapici,