کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7971925 | 1514614 | 2018 | 20 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Effect of microstructures to tensile and impact properties of stir zone on 9%Cr reduced activation ferritic/martensitic steel friction stir welds
ترجمه فارسی عنوان
اثر ریزساختارها بر خواص کششی و ضربه زدگی روی 9٪ کروم کاهش فعال سازی فولاد فریتی / مارنزیتی اصطکاک سیم جوش
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
کاهش فعالیت فلزی فریت / مارتنزیت، اصطکاک جوشکاری منطقه را بشویید ریز ساختارها، خواص کششی، سختی ضربه،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
چکیده انگلیسی
The present study reports the microstructural evolution and mechanical properties of the stir zone (SZ) in friction stir welding (FSW) reduced activation ferritic/martensitic (RAFM) steel. The effects of the grain size, retained austenite (RA), and precipitates on the SZ tensile properties and impact toughness are discussed. The SZ of the weld exhibits a good balance of strength and ductility at 600â¯Â°C temperatures and a slightly decrease of impact toughness comparing with the base metal (BM). The RA plays a critical role in effecting the ductility and impact toughness of SZ. The influence of RA to the ductility of SZ becomes more effective as the carbon concentration of RA is increased to 1% or above where the thermal and mechanical stabilities are improved. The highly dispersed and refined MX carbonitrides and M3C carbides during FSW are good for the ductility and impact toughness of SZ as well. It indicates the SZ of FSW RAFM steel weld has the potential to have good mechanical properties.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 729, 27 June 2018, Pages 257-267
Journal: Materials Science and Engineering: A - Volume 729, 27 June 2018, Pages 257-267
نویسندگان
Chao Zhang, Lei Cui, Dongpo Wang, Yongchang Liu, Huijun Li,