کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7972101 | 1514616 | 2018 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Mechanical property improvement induced by nanoscaled deformation twins in cold-sprayed Cu coatings
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Mechanical property improvement induced by nanoscaled deformation twins in cold-sprayed Cu coatings Mechanical property improvement induced by nanoscaled deformation twins in cold-sprayed Cu coatings](/preview/png/7972101.png)
چکیده انگلیسی
Nanoscaled deformation twins have been observed in cold sprayed Cu coatings and the coating hardness has been improved by this kind of tiny twins. Strain rate up to 109 sâ1 at the impact interfaces can be achieved at the cold spray process, and the maximum shearing compressive stress and tensile stress are 392â¯MPa and 397â¯MPa, respectively, obtained from impacting simulations. They are larger than the required shearing stress for the formation of deformation twins in Cu. The orientation relationship between the stripes can be determined to be (111¯)Mâ¥(111¯)T and (1¯10)Mâ¥(101)T both in coatings prepared by cold spray Cu particles annealed at 700â°C and 250â°C, respectively. The hardness of the coatings is higher than that of the corresponding substrates which indicates the improvement by the work hardening effect in the cold spray process. Though the misorientation of the deformation twins in the coatings slightly deviates from 60°, the existence of nanoscaled deformation twins improves its hardness significantly.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 727, 6 June 2018, Pages 119-122
Journal: Materials Science and Engineering: A - Volume 727, 6 June 2018, Pages 119-122
نویسندگان
Yan Feng, Wenya Li, Chaowei Guo, Mingjie Gong, Kang Yang,