کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7972694 1514620 2018 25 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Identification of anisotropic plasticity properties of materials using spherical indentation imprint mapping
ترجمه فارسی عنوان
شناسایی خواص پلاستیسیته انیزوتروپیک مواد با استفاده از نقشه کشی مستطیلی کروی
کلمات کلیدی
بی خوابی پلاستیک، شناسایی پارامترها، انداز کروی، اثر باقی مانده، تجزیه و تحلیل معکوس،
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد دانش مواد (عمومی)
چکیده انگلیسی
In this paper, a new inverse method is proposed to identify the anisotropic plasticity properties of materials using solely the residual imprint mapping in spherical indentation. This method does not need the entire load-displacement (P-h) curve in spherical indentation experiment. The stress strain curves along transverse and longitudinal directions of the indented specimens can be simultaneously identified using single spherical indentation test. The new method is based on weighting the average and difference amounts, S̅ and ∆S of the residual imprint snapshots along transverse and longitudinal directions. The proper orthogonal decomposition is used to correlate the effective imprint snapshots with material constitutive parameters, and the inverse problem is solved by the “Interior-point” optimization algorithm. We finally applied the new method on the SiCw/A6061. The well-posed solution of material properties is achieved, and the anisotropic plasticity parameters obtained from indentation and uniaxial tests show good agreement. Besides, the influence of weighting factor and experiment error on the numerical results are also investigated. Results indicate the proposed inverse method is very effective and reliable.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 723, 18 April 2018, Pages 269-278
نویسندگان
, , , , ,