کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7974940 | 1514669 | 2016 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Thermomechanical response of a TWIP steel during monotonic and non-monotonic uniaxial loading
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
The tensile properties of a Fe-18%Mn-0.6%C-1.5%Al Twinning-Induced Plasticity (TWIP) steel were investigated at different strain rates in three loading modes, i.e. uniaxial monotonic loading, stress relaxation and loading-unloading-reloading. Infrared thermography was used to investigate the effect of the dynamic strain aging, the strain rate and the temperature on the flow stress. In addition to the standard, i.e., non-isothermal tensile tests, isothermal uniaxial tensile tests were performed at 25 °C, 45 °C and 65 °C. While the non-monotonic loading modes resulted in an increase of the total elongation at a low strain rate of 10â3 sâ1, no increase was observed for strain rates higher than 6Ã10â3 sâ1. The temperature gradients observed during non-isothermal tests were reduced when non-monotonic loading conditions were used. Temperature changes were found to influence the hardening behavior, and consequently the ductility, of the TWIP steel. Deformation twinning also had a significant influence on the results as its kinetics in TWIP steel are determined by the temperature dependence of the stacking fault energy.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 674, 30 September 2016, Pages 276-285
Journal: Materials Science and Engineering: A - Volume 674, 30 September 2016, Pages 276-285
نویسندگان
Omid Majidi, B.C. De Cooman, Frederic Barlat, Myoung-Gyu Lee, Yannis P. Korkolis,