کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7976118 | 1514692 | 2016 | 22 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microstructure and mechanical properties of the new Nb25Sc25Ti25Zr25 eutectic high entropy alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Microstructure and mechanical properties of the new Nb25Sc25Ti25Zr25 eutectic high entropy alloy Microstructure and mechanical properties of the new Nb25Sc25Ti25Zr25 eutectic high entropy alloy](/preview/png/7976118.png)
چکیده انگلیسی
The novel quaternary Nb25Sc25Ti25Zr25 (at.%) high entropy alloy with dual-phase structure was developed and cast by arc melting of elemental precursors. The as-cast state comprised of lamellar eutectics with alternating α(Sc, Zr) with HCP lattice plates having thickness of 30-50 nm, length up to 600 nm and inter-lamellar spacing of 5-40 nm, embedded in the β-NbZrTi matrix with BCC structure. While the α(Sc, Zr) plates showed reduced content of Nb, the β-NbZrTi matrix was particularly depleted in Sc. The unique mixture of fine hexagonal α(Sc, Zr) plates within the β-NbTiZr matrix in as-cast state led to relatively high combination of strength and ductility: the alloy with initial hardness of 418 HV reached compressive strength of 1250 MPa, yield strength of 1020 MPa and compressibility of 8.2%. The phase composition exhibited high stability with no significant changes taking place after annealing at 1000 ËC for 24 h. The high-temperature exposure caused only coarsening of α(Sc, Zr) hexagonal plates, which reached 3 μm in width and 5-10 μm in length. The plastic strain of the annealed alloy with hardness of 202 HV increased to 20% while compression strength decreased to 670 MPa. As opposed to the as-cast state, the annealed alloy exhibited limited strain hardening during room-temperature compression.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 651, 10 January 2016, Pages 590-597
Journal: Materials Science and Engineering: A - Volume 651, 10 January 2016, Pages 590-597
نویسندگان
Å. Rogal, J. Morgiel, Z. ÅwiÄ
tek, F. CzerwiÅski,