کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7976367 1514692 2016 6 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Effects of deformation on the microstructures and mechanical properties of carbide-free bainitic steel for railway crossing and its hydrogen embrittlement characteristics
ترجمه فارسی عنوان
اثر تغییر شکل در ریزساختارها و خواص مکانیکی فولاد باینتی غیر کاربید برای عبور از راه آهن و ویژگی های هیدروژن هیدروژنی آن
ترجمه چکیده
اثر تغییر شکل بر ریزساختارها و خواص مکانیکی فولاد بئینتیس بدون کاربید برای گذر راه آهن به منظور بررسی خصوصیات بحرانی هیدروژن فولاد باینیت تغییر شکل، مورد مطالعه قرار گرفت. تغییر شکل کوچک می تواند موجب افزایش قابل توجهی در قدرت و کاهش اسلش در پلاستیک یکنواخت شود. تراکم زیاد تخریبها که در طول تغییر شکل انباشته شده و مارنزیت با مقاومت بالا شکل می گیرد باید تغییرات خواص مکانیکی را به عهده بگیرد. نتایج آزمون های سرعت آستانه فشار نشان می دهد که حساسیت هیدرولیکی ضعیف تر برای فولاد بیاینتیک تغییر شکل یافته در مقایسه با فولاد نامنظم است که با افزایش افزایش نیز افزایش می یابد. این باید به فاز مارتنزیت جدید تشکیل شده، انحراف انباشته شده و استرس باقی مانده ناهمگن در نمونه های تغییر شکل داده شود. مشاهدات فراکتوگرافی با افزایش زمان شارژ هیدروژن، حالت شکستگی را تغییر می دهد از مجاری و شکننده.
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد دانش مواد (عمومی)
چکیده انگلیسی
The effects of deformation on the microstructures and mechanical properties of carbide-free bainitic steel for railway crossing were studied in detail, with an aim of analyzing the hydrogen embrittlement characteristics of the deformed bainitic steel. A small deformation could cause a notable increase in the strength and a slash decrease in uniform plasticity. High density of dislocations accumulated during the deformation and the newly formed high strength martensite should be responsible for the changes of mechanical properties. Results from the slow strain rate tests reveal that the hydrogen embrittlement sensitivity is higher for the deformed bainitic steel as compared with the undeformed steel, which also increase with increasing reduction. It should be attributed to the newly formed martensite phase, the accumulated dislocations and the heterogeneous residual stress in the deformed specimens. Fractography observations reveal a changed fracture mode from ductile to brittle with increasing hydrogen charging time.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 651, 10 January 2016, Pages 945-950
نویسندگان
, , , , , ,