کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
7976536 1514693 2016 19 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
Microstructure and mechanical properties of commercially pure titanium foam with varied cell size fabricated by replica impregnation method
ترجمه فارسی عنوان
خواص میکروارگانیسم و ​​خواص مکانیکی فوم تیتانیوم خالص تجاری با اندازه سلولی متنوع ساخته شده با استفاده از روش آغشته سازی ماکت
کلمات کلیدی
متالورژی پودر، فوم تیتانیوم، فوم پودر ویژگی های مکانیکی،
موضوعات مرتبط
مهندسی و علوم پایه مهندسی مواد دانش مواد (عمومی)
چکیده انگلیسی
The most common sacrificial material for producing metal foam using the replica impregnation method is polyurethane foam (PU) since it is readily available with different cell sizes. This work studied the microstructure and mechanical properties of commercially pure titanium with varied cell sizes. Titanium foams were fabricated using PU foam with four different cell sizes as templates. The results show that as the number of pores per inch (ppi) increased, the apparent density increased, i.e. the cell size decreased, the porosity decreased and the load bearing capacity increased nonlinearly. This work agreed with the scaling law of Gibson and Ashby for determination of the limit stress. However, the Gibson and Ashby model significantly over-predicted the value for quasi-elastic modulus.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 650, 5 January 2016, Pages 432-437
نویسندگان
, , ,