کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7977946 | 1514704 | 2015 | 23 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Drop weight impact behavior of functionally graded aluminum foam consisting of A1050 and A6061 aluminum alloys
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
A1050/A6061 functionally graded aluminum foams (FG Al foams) with two layers consisting of A1050 and A6061 Al foams were successfully fabricated by the friction stir welding (FSW) route precursor foaming method. Drop weight impact tests of the FG Al foams were conducted to reveal the dynamic responses of the A1050/A6061 FG Al foams. The deformation of the FG Al foams started from the A1050 Al foam layer then spread to the A6061 Al foam layer during the impact tests regardless of the location of the A1050 Al foam layer in the specimens. The stress-strain curves obtained during the impact tests revealed two plateau regions with low and high strength corresponding to the deformation of each layer. The plateau stresses during the deformation of each layer were almost the same as those of uniform A1050 and A6061 Al foams. Consequently, it was shown that, by varying the base materials, it is possible to control the compression deformation behavior of FG Al foam with the desired plateau stress during impact tests, which depends on the strength of the base materials.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 639, 15 July 2015, Pages 597-603
Journal: Materials Science and Engineering: A - Volume 639, 15 July 2015, Pages 597-603
نویسندگان
Yoshihiko Hangai, Naoyuki Kubota, Takao Utsunomiya, Hisanobu Kawashima, Osamu Kuwazuru, Nobuhiro Yoshikawa,