کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7978900 | 1514718 | 2015 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microstructural effects on the magnitude of Lüders strains in a low alloy steel
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Tensile testing of a 0.17% C-Ni-Cr-Mo pressure vessel steel showed the presence of Lüders banding. Lüders strains ranged from 0.6 to 0.7% for a ferrite-pearlite microstructure, 0.8-0.9% for an upper bainite microstructure to 3.2-4.1% for a tempered martensite microstructure. Lüders strains tended to slightly increase with an increase of strain rate in the range 10â4-10â2Â sâ1. Modelling of the deformation showed how the strain in the bands developed as a function of time and this was confirmed by the use of differential image correlation measurements of the straining of the specimen. Multiple banding was observed in some specimens but the magnitudes of the strains seen in each band were similar and comparable to the global Lüders strain. Confirmation of the decrease in magnitude of the Lüders strain with increasing carbon content was also seen in tests on lower carbon content steels, as was also the decrease in magnitude of Lüders strain associated with larger grain sizes.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 625, 11 February 2015, Pages 36-45
Journal: Materials Science and Engineering: A - Volume 625, 11 February 2015, Pages 36-45
نویسندگان
D.H. Johnson, M.R. Edwards, P. Chard-Tuckey,