کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7980996 | 1514732 | 2014 | 30 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Strain partitioning in dual-phase steels containing tempered martensite
ترجمه فارسی عنوان
جداسازی فشار در فولادهای دو فاز حاوی مارنزیت ملایم
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
فولاد دو مرحله ای، جداسازی فشار ویژگی های مکانیکی، مدل عنصر محدود شکل پذیری،
ترجمه چکیده
خرد کردن به عنوان یک روش برای توسعه طیف وسیعی از فولاد دو مرحله ای با همان مورفولوژی و حجم کریستال مارتنزیت استفاده شده است، اما شامل فاز هایی با قدرت نسبی مختلف است. این فولادها برای بررسی جداسازی فشار بین دو مرحله تشکیل شده از طریق آزمایش های مکانیکی و عددی از طریق مدل سازی عناصر محدود استفاده شده است. مشخص شد افزایش دیفرانسیل در قدرت بین دو مرحله نه تنها باعث تولید مناطق سوزی بالا می شود، بلکه مناطق کم فشار نیز تولید می کند. به طور متوسط، اختلاف بیشتر در استحکام بین فاز ها موجب افزایش فشار در مرحله ی نرم تر شد. هیچ محلی قابل کشف ترجیحی کشف شده به رابط فریت / مارتنزیت وجود نداشت، با توجه به مکان های تعیین کننده کرنش توسط مورفولوژی ریزساختار. همبستگی مستقیمی بین فشار متوسط در فریت و قابلیت ورشکستگی اندازه گیری پیدا شده است.
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
چکیده انگلیسی
Tempering has been used as a method to develop a range of dual phase steels with the same martensite morphology and volume fraction, but containing phases with different relative strengths. These steels were used to examine the strain partitioning between the two constituent phases experimentally through mechanical testing and numerically through finite element modelling. It was found that increasing the differential in strength between the two phases not only produces regions of high strain, but also regions of low strain. On average, a larger difference in strength between the phases increased the strain carried by the softer phase. There was no discernible preferential strain localisation to the ferrite/martensite interface, with the regions of strain localisation being determined by the morphology of the microstructure. A direct correlation between the average strain in the ferrite, and the measured ductility has been found.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 611, 12 August 2014, Pages 90-99
Journal: Materials Science and Engineering: A - Volume 611, 12 August 2014, Pages 90-99
نویسندگان
Qihang Han, Alireza Asgari, Peter D. Hodgson, Nicole Stanford,