کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7981184 | 1514743 | 2014 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Hot working and geometric dynamic recrystallisation behaviour of a near-α titanium alloy with acicular microstructure
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Hot working and geometric dynamic recrystallisation behaviour of a near-α titanium alloy with acicular microstructure Hot working and geometric dynamic recrystallisation behaviour of a near-α titanium alloy with acicular microstructure](/preview/png/7981184.png)
چکیده انگلیسی
The hot working behaviour of near-α titanium alloy - TITAN 29A (equivalent to IMI 834) with an acicular starting microstructure was evaluated by carrying out hot compression tests over a range of temperatures (850-1060 °C) and strain rates (3Ã10â4-100/s). Using the flow curves, processing maps were generated to identify the safe processing window for the material. The material exhibits a deterministic domain between 920 and 1030 °C at low strain rates of 3Ã10â4-10â3/s where it undergoes geometric dynamic recrystallisation (GDRX) or globularisation of α lamellae. The initiation and evolution of globularisation was investigated using the flow curve analysis method. The work hardening rate (θ)-flow stress (Ï) curve was used to estimate the critical strain (εc) required for initiation of globularisation and the saturation stress (Ïsat) for dynamic recovery (DRV). The recrystallised or globularised volume fraction (X) was estimated from the difference between the calculated DRV and experimental DRX curves. The estimated globularised volume fraction modelled using Avrami equation was found to match with the microstructural observations.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 600, 10 April 2014, Pages 135-144
Journal: Materials Science and Engineering: A - Volume 600, 10 April 2014, Pages 135-144
نویسندگان
I. Balasundar, T. Raghu, B.P. Kashyap,