کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7981910 | 1514753 | 2014 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microstructural evolution and microhardness change of Al-7wt%Si-0.3wt%Mg alloy granules/powder particles during high energy ball milling
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله
![عکس صفحه اول مقاله: Microstructural evolution and microhardness change of Al-7wt%Si-0.3wt%Mg alloy granules/powder particles during high energy ball milling Microstructural evolution and microhardness change of Al-7wt%Si-0.3wt%Mg alloy granules/powder particles during high energy ball milling](/preview/png/7981910.png)
چکیده انگلیسی
Al-7wt%Si-0.3wt%Mg alloy granules produced by mechanical crushing of machining chips were subjected to high energy ball milling. It was found that ball milling significantly reduced the sizes of eutectic Si particles from micrometer level to submicrometer level, changed their morphology from being faceted into being rounded, and caused formation of stacking faults in them. Ball milling also resulted in a drastic change of the Al(Si,Mg) matrix by increasing its Si content from 0.16 to 1.81Â at%, and reducing its average grain size to 45Â nm. These microstructural changes of the powder particles lead to a dramatic increase of the microhardness of the powder particles to 187Â HV, which is more than twice that of the original granules. Analysis of the contributions of various strengthening mechanisms shows that the major contribution to the microhardness increase comes from grain refinement.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 590, 10 January 2014, Pages 307-313
Journal: Materials Science and Engineering: A - Volume 590, 10 January 2014, Pages 307-313
نویسندگان
J.M. Liang, M.T. Jia, X.Q. Guo, D.L. Zhang,