کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7982974 | 1514767 | 2013 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Microstructures and mechanical properties of as-cast and as-extruded Mg-4.50Zn-1.13Ca (wt%) alloys
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
A large Mg-4.50Zn-1.13Ca (wt%) alloy ingot 350 mm in diameter and 1730 mm long was successfully fabricated by semi-continuous casting. The microstructures and mechanical properties of the as-cast and as-extruded alloys were investigated. The as-cast alloy exhibits uniform chemical composition and microstructure from the centre to the surface of the ingot and mainly consists of α-Mg and Ca2Mg6Zn3. The coarse grains and network-like second phases that are distributed at the grain boundaries result in poor mechanical properties for the as-cast alloy. The mechanical properties of the as-extruded alloys are significantly enhanced. The high yield strengths of the as-extruded alloys mainly result from the fine DRXed grain and the stronger basal texture.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 576, 1 August 2013, Pages 6-13
Journal: Materials Science and Engineering: A - Volume 576, 1 August 2013, Pages 6-13
نویسندگان
Y.Z. Du, M.Y. Zheng, C. Xu, X.G. Qiao, K. Wu, X.D. Liu, G.J. Wang, X.Y. Lv,