کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7983034 | 1514767 | 2013 | 7 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
High temperature deformation behavior and optimal hot processing parameters of Al-Si eutectic alloy
ترجمه فارسی عنوان
رفتار تغییر شکل داده شده با درجه حرارت بالا و پارامترهای پردازش داغ بهینه از آلیاژ اکتیو آل سی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
رفتار تغییر شکل انرژی فعال سازی تغییر شکل نقشه پردازش داغ آلیاژ آلومینیوم ائوتکتیک، پارامترهای پردازش مطلوب،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
دانش مواد (عمومی)
چکیده انگلیسی
High temperature deformation behavior of Al-Si eutectic alloy was investigated by compression tests conducted at various temperatures (563, 603, 643, 683, 723, and 763Â K) with various strain rates of 0.001, 0.01, 0.05 and 1Â sâ1. Hot processing map and extrusion test were used to optimize hot processing parameters. The results that are obtained show that the main high temperature deformation mechanism of the Al-Si eutectic alloy is dislocation movement. The difference between the maximum deformation activation energy of 178Â kJ/mol and self-diffusion activation energy of pure aluminum results from rupture of eutectic silicon crystals. The deformation activation energy and instable domain decrease with increasing strain. Then the effects of strain on deformation activation energy and instable domain are negligible at higher stain than 0.4. The optimal hot processing parameters of the Al-Si eutectic allFoy are deformation temperature ranging from 660Â K to 723Â K, lower strain rate than 10â1.5Â sâ1, and strain of 0.51-1.20.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Materials Science and Engineering: A - Volume 576, 1 August 2013, Pages 45-51
Journal: Materials Science and Engineering: A - Volume 576, 1 August 2013, Pages 45-51
نویسندگان
H.E. Hu, Xin-yun Wang, Lei Deng,