کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7988760 | 1515869 | 2013 | 10 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Thermal stability of Ti-44Al-4Nb-4Zr-0.2Si-1B alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
A near lamellar γâTiAl alloy Ti-44Al-4Nb-4Zr-0.2Si-1B was ingot cast and exposed at 700 °C for up to 10,000 h. The combined addition of Nb and Zr rather than Nb alone has a positive effect on stabilization of α2 lamellae. Compared to alloy Ti-44Al-8Nb-1B, less amount of α2 dissolved and less amount of β (B2 + Ï) formed in the alloy after the same exposure scheme. However, the exposure-induced embrittlement is still severe in this alloy. The ductility after 10,000-h exposure is only 1/4 of the original value. The exposure-induced embrittlement is attributed to the profound changes in prior β regions: the precipitation of fine D88-Ï particles in the B82-Ï matrix; the prevalent formation of γ grains inside the prior β regions; and the widespread precipitation of silicide particles at cell interfaces and β grain boundaries. The tensile strengths remain essentially unchanged while fatigue limit increased significantly. The mechanism behind the microstructural changes and mechanical properties is discussed in detail.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Intermetallics - Volume 42, November 2013, Pages 170-179
Journal: Intermetallics - Volume 42, November 2013, Pages 170-179
نویسندگان
Z.W. Huang,