کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
7988846 | 1515872 | 2013 | 5 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Tensile properties of high- and medium-entropy alloys
ترجمه فارسی عنوان
خواص کششی از آلیاژهای بالا و متوسط آنتروپی
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
فلزات و آلیاژها
چکیده انگلیسی
Equiatomic, face-centered-cubic, high- and medium-entropy alloys were arc melted, hot-rolled to produce recrystallized sheets, and tensile tested. The alloys having the compositions CrMnFeCoNi and CrFeCoNi exhibited a strong temperature-dependent decrease in strength with increasing temperature from â196 °C to 1000 °C, and a relatively weak strain-rate dependence (at 10â3 and 10â1 sâ1). Ductility did not vary inversely with yield strength; rather, when strength doubled as the test temperature was decreased from room temperature to â196 °C, elongation to fracture increased by a factor of 1.5 to >60%. A high degree of work hardening, possibly due to deformation-induced nanotwinning, postpones the onset of necking and may be the reason for the ductility increase.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Intermetallics - Volume 39, August 2013, Pages 74-78
Journal: Intermetallics - Volume 39, August 2013, Pages 74-78
نویسندگان
A. Gali, E.P. George,