کد مقاله کد نشریه سال انتشار مقاله انگلیسی نسخه تمام متن
800337 1467472 2014 8 صفحه PDF دانلود رایگان
عنوان انگلیسی مقاله ISI
On the influence of the initial ramp for a correct definition of the parameters of fractional viscoelastic materials
ترجمه فارسی عنوان
در تأثیر رمپ اولیه برای تعریف درست از پارامترهای مواد ویسکولاستیک کسر است
موضوعات مرتبط
مهندسی و علوم پایه سایر رشته های مهندسی مهندسی مکانیک
چکیده انگلیسی


• The theoretical relaxation test presumes that the imposed strain is a unit step function.
• The real imposed deformation history has a ramp in the initial time.
• Incorrect parameters are obtained not taking account of initial deformation ramp.
• In every experimental test the rate of the initial ramp must be always declared.

Creep and/or Relaxation tests on viscoelastic materials show a power-law trend. Based upon Boltzmann superposition principle the constitutive law with a power-law kernel is ruled by the Caputo’s fractional derivative. Fractional constitutive law posses a long memory and then the parameters obtained by best fitting procedures on experimental data are strongly influenced by the prestress on the specimen. As in fact during the relaxation test the imposed history of deformation is not instantaneously applied, since a unit step function may not be realized by the test machine.Usually an initial ramp is present in the deformation history and the time at which the deformation attains the maximum value is fixed by the operator. Even though the pre-charge time is small in comparison with the total duration of the observation time, the parameters obtained by the best fitting procedure leads to relevant error especially for small observation time. In the paper the problem is overcome by considering the time load history for both theoretical and experimental point of view. In order to demonstrate experimentally that the initial ramp of deformation strongly influences the stress history during the relaxation test, different tests were performed on samples of a commercial epoxy resin (SP106) at two different rates of deformation (i.e. 0.2 mm/mm and 2 mm/min).Moreover the corrected approach for the best fitting of the data permits to characterize the viscoelastic materials, in term of fractional viscoelastic parameters, in a short time, and this allows to reduce the long duration of the experimental tests.

ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Mechanics of Materials - Volume 69, Issue 1, February 2014, Pages 63–70
نویسندگان
, , , ,