Thermal stability of retained austenite and mechanical properties of medium-Mn steel during tempering treatment

The thermal stability of retained austenite (RA) and the mechanical properties of the quenched and intercritical annealed 0.1C-5Mn steel with the starting ultrafine lamellar duplex structure of ferrite and retained austenite during tempering within the range from 200 to 500 °C were studied by X-ray diffraction (XRD), transmission electron microscopy (TEM) and tensile testing. The results showed that there was a slight decrease in the RA volume fraction with increasing tempering temperature up to 400 °C. This caused a slight increase in the ultimate tensile strength (UTS) and a slight decrease in the total elongation (TE); thus, the product of UTS to TE (UTS×TE) as high as 31 GPa
- % was obtained and remained nearly unchanged. However, a portion of the RA began to decompose when tempered at 500 °C and thus caused a ∼35% decrease of the RA fraction and a ∼16% decrease of the value of UTS×TE. It is concluded that the ultrafine lamellar duplex structure is rather stable and the excellent combination of strength and ductility could be retained with tempering temperature up to 400 °C. Thus, thermal processes such as galvanization are feasible for the tested steel provided that their temperatures are not higher than 400 °C.