کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
801049 | 904051 | 2009 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
On the stress distribution around the hole in mechanically fastened joints
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی مکانیک
پیش نمایش صفحه اول مقاله

چکیده انگلیسی
In this work, different issues of mechanical engineering interests are computed for mechanically fastened joints. A study of the pin and the plate material dissimilarity was done by Iyer [Iyer, K., 2001. Solutions for contact in pinned connections. Int. J. Solids Struct. 38(50), 9133–9148] but still different aspects of the problem are remained to be mentioned. In order to have a good evaluation of the stress distribution around the hole, design factors such as plate width, edge distance, clearance and friction at the connection area were systematically varied during analyses. Based on the results, it is observed that higher friction and smaller plate width make the joints more safe.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Mechanics Research Communications - Volume 36, Issue 3, April 2009, Pages 373–380
Journal: Mechanics Research Communications - Volume 36, Issue 3, April 2009, Pages 373–380
نویسندگان
Vahid Yavari, Iraj Rajabi, Farshad Daneshvar, Mohammad Hassan Kadivar,