Temperature dependent bulge test for elastomers

• Comprehensive literature review of biaxial testing.
• Introduction of the bulge test for elastomers at varying temperature.
• Equibiaxial behavior of poly(norbornene) at three temperature.

The bulge test is a particularly convenient testing method for characterizing elastomers under biaxial loading. In addition, it is convenient to utilize this test for validating material models in simulation due to the heterogeneous strain field induced during inflation. During the bulge test the strain field for elastomers covers uniaxial tension at the border to pure shear and equibiaxial tension at the pole. Elastomeric materials exhibit a hyperelastic material behavior, with a dependency on temperature and loading rate. The temperature effect on the mechanical behavior during biaxial loading is considered in the present study. A bulge test setup combined with a temperature chamber is developed in order to characterize this effect, and an exemplary temperature dependent characterization of a poly(norbornene) elastomer is performed with this setup. The equibiaxial stress–strain curves measured at 60 °C, 20 °C and −20 °C are presented.