کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8044047 | 1518914 | 2018 | 8 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Brazing TiC/Ti matrix composite using TiNi eutectic braze alloy
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سطوح، پوششها و فیلمها
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Vacuum brazing of TiC/Ti matrix composite was performed using Ti-28mass%Ni eutectic brazing alloy. The brazed joints were obtained at different temperatures and holding times. The microstructure and mechanical properties of the joints were investigated in detail. The results show that the typical interfacial microstructure of the brazed joints is Ti solid solution, δ-Ti2Ni phase and TiC particles. As the brazing temperature was increased from 1283â¯K/10min to 1353â¯K/10min, the joint shear strength first increased and then decreased. Prolonging the holding time, caused the shear strength of the joints to decrease. The maximum shear strength reached 711.4â¯MPaâ¯at 1333â¯K for 10â¯min, which is more than twice that obtained with the conventional brazing of Ti alloys. The fracture location varied from the brazing joints to the substrate in different brazing processes. The fracture path, located at the substrate, can only be found at 1333â¯K/10min. The microstructural evolution of the brazed joints with different brazing processes was clarified and its relationship with the mechanical performance was revealed in detail.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Vacuum - Volume 156, October 2018, Pages 411-418
Journal: Vacuum - Volume 156, October 2018, Pages 411-418
نویسندگان
Duo Dong, Dongdong Zhu, Huixia Zheng, Gang Wang, Haitao Xu, Feng Lin, Qin He, Chengyuan Ni,