کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8044562 | 1518921 | 2018 | 4 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Use of a solid carbon precursor for DC plasma nitrocarburizing of AISI 4140 steel
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سطوح، پوششها و فیلمها
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
A new surface treatment concept of solid carbon source plasma nitrocarburizing (SCS-PNC) was proposed. Carbon fiber carbon composite (CFC) was used as a solid carbon precursor for conventional DC plasma nitriding process in a nitrogen-hydrogen plasma. The effect of plasma power on the phase composition of the compound layer on AISI 4140 steel was investigated. The results of the SCS-PNC process were compared to conventional DC plasma nitriding (PN) and plasma nitrocarburizing (PNC) using methane as carbon-bearing gas. The SCS-PNC process provides increasing carbon concentration within the compound layer with increasing plasma power density. In the compound layer a constant carbon content of 1.5â¯wt.-% C was obtained for high plasma power densities and the ε-carbonitride Fe2-3(C,N)x formation was significantly promoted reducing the porous seam zone. Moreover, precipitation of unwanted cementite Fe3C in the compound layer was effectively suppressed for SCS-PNC compared to treatment by PNC with methane addition.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Vacuum - Volume 149, March 2018, Pages 146-149
Journal: Vacuum - Volume 149, March 2018, Pages 146-149
نویسندگان
Anke Dalke, Igor Burlacov, Heinz-Joachim Spies, Horst Biermann,