کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8045011 | 1518954 | 2015 | 43 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Alloying of austenitic steel surface with zirconium using nitrogen compression plasma flow
ترجمه فارسی عنوان
آلیاژ سطح فولاد آستنیتی با زیرکونیم با استفاده از جریان پلاسما فشرده سازی نیتروژن
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
جریان پلاسما فشرده، آلیاژ سطح فولاد آستنیتی، زیرکونیوم،
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سطوح، پوششها و فیلمها
چکیده انگلیسی
In this study, the effect of a nitrogen compression plasma flow on the microstructural and mechanical properties, as well as on the elemental and phase compositions of a Zr/chromium-nickel steel system has been investigated. The Zr/steel system was exposed to a single pulse of the compression plasma flow or to a series of pulses. The samples were characterized by scanning electron microscopy, Auger electron spectroscopy, X-ray diffraction, and energy dispersive X-ray analyses, and subjected to a Vickers microhardness test. The findings showed the formation of a surface modified layer alloyed by Zr with the thickness of up to â¼12 μm. The modified layer contains α- and γ-iron-based solid solutions, the Fe23Zr6 intermetallic compound, and ZrN and Cr2N nitrides due to nitrogen diffusion. The microhardness of the modified layer increased by a factor of â¼2.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Vacuum - Volume 115, May 2015, Pages 39-45
Journal: Vacuum - Volume 115, May 2015, Pages 39-45
نویسندگان
A.H. Sari, V.M. Astashynski, E.A. Kostyukevich, V.V. Uglov, N.N. Cherenda,