کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8045157 | 1518968 | 2014 | 13 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Surface nanocrystallization induced by fast multiple rotation rolling on Ti-6Al-4V and its effect on microstructure and properties
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
مهندسی مواد
سطوح، پوششها و فیلمها
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
A nanostructured layer was fabricated by using fast multiple rotation rolling (FMRR) on the surface of Ti-6Al-4V alloy, with grain size 10-19 nm in the top surface layer by means of XRD and TEM analysis. A deformation layer with thickness about 80 μm is clearly observed in the cross section of FMRR sample. The microhardness of the FMRR sample has an obvious change along the depth from about 368 HV in the top surface layer to about 260 HV in the matrix. The corrosion resistance of the Ti-6Al-4V alloy was improved after FMRR. The high density of grain boundaries in the surface nanocrystalline layer was beneficial to the formation of passive film, which accounted for the improvement of the polarization behavior of the FMRR sample.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Vacuum - Volume 101, March 2014, Pages 102-106
Journal: Vacuum - Volume 101, March 2014, Pages 102-106
نویسندگان
Yang Li, Kangning Sun, Peng Liu, Yi Liu, Pengfei Chui,