کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
8047933 | 1519222 | 2018 | 11 صفحه PDF | دانلود رایگان |
عنوان انگلیسی مقاله ISI
Characterization and analysis of diffusion bonding process in a Cr25Ni7Mo4MnSi duplex stainless steel
دانلود مقاله + سفارش ترجمه
دانلود مقاله ISI انگلیسی
رایگان برای ایرانیان
کلمات کلیدی
موضوعات مرتبط
مهندسی و علوم پایه
سایر رشته های مهندسی
مهندسی صنعتی و تولید
پیش نمایش صفحه اول مقاله
چکیده انگلیسی
Similar diffusion bonding of a duplex stainless steel (Cr25Ni7Mo4MnSi) was performed using a Gleeble 3500 thermo-mechanical simulator. Isostatic diffusion bonding was carried out at 1100â¯Â°C. The effect of surface condition, cold rolling, holding time and pressure was systematically studied. Microstructures along bonding interface were characterized using scanning electron microscopy and electron backscattering diffraction. The mechanisms of diffusion bonding were analyzed in terms of plastic deformation, diffusion, and rotation and migration of grain boundaries. Small surface roughness and large cold rolling were beneficial for bonding process while increasing holding time and pressure first greatly and then slowly increased the joint shear strength. Holding for 5â¯min at a pressure of 10â¯MPa obtained the joint shear strength of 407â¯MPa, which is comparable to 420â¯MPa of the base material. The influence of superplastic deformation was also analyzed, indicating a larger deformation (20% to 50%) led to a larger joint shear strength (395 to 418â¯MPa). These demonstrate the feasibility of this steel for superplastic forming and diffusion bonding technique.
ناشر
Database: Elsevier - ScienceDirect (ساینس دایرکت)
Journal: Journal of Manufacturing Processes - Volume 34, Part A, August 2018, Pages 603-613
Journal: Journal of Manufacturing Processes - Volume 34, Part A, August 2018, Pages 603-613
نویسندگان
Xueping Ren, Xiaohui Chen, Zhiping Xiong,