Machining characteristics and removal mechanisms of moving electric arcs in high-speed EDM milling

Low machining efficiency is the major challenges of conventional electrical discharge machining (EDM). To resolve this problem, a novel machining method of high-speed EDM milling with moving electric arcs was developed, which can remove material continuously without discharge intervals of pulse power supply and achieve extremely low tool-electrode wear for the direct-current power supply employed. An EDM milling equipment was devised to explore machining characteristics and removal mechanisms of moving electric arcs in high-speed EDM milling process. Firstly of all, the motion characteristics of moving electric arcs were investigated. The theoretical analysis shows that the arcs maintain an independent movement relative to the tool-electrode and workpiece. Then, the plasma channels were captured by high-speed video camera, which contributed to develop the model of removal mechanisms of moving electric arcs. Finally, the machining experiments were carried out based on titanium alloy, which verified that a much higher material removal rate could be easily achieved by moving electric arc. Moreover, the tool-electrode wear in high-speed EDM milling is much lower than conventional EDM due to the protective layer formation.