Comparison between synthetic jets and continuous jets for active flow control: Application on a NACA 0015 and a compressor stator cascade

Finally, the flow behaviour and the topology structure in a highly loaded compressor cascade with and without AFC are examined. Active flow control using synthetic jet actuators proved to be attractive because it could exploit the unsteady phenomena, inhibit the separation, improve and control the aerodynamics of the flow in both external aerodynamics and turbomachinery components. Furthermore, comparing the CJA and the SJA for active flow control on the compressor at similar momentum coefficients shows that the relative reduction of the total pressure losses for the SJA is approximately twice as large as that for the CJA. It should also be remarked that even if the two AFC configurations present similar effects on the reduction of secondary flow structures, the SJA is more advantageous than the CJA from the regaining energy viewpoint.