Mechanical properties and thermal behaviour of PEGDMA hydrogels for potential bone regeneration application

Poly(ethylene glycol) hydrogels are currently under investigation as possible scaffold materials for bone regeneration. The main purpose of this research was to analyse the mechanical properties and thermal behaviour of novel photopolymerised poly(ethylene glycol) dimethacrylate (PEGDMA) based hydrogels. The effect of varying macromolecular monomer concentration, molecular weight and water content on the properties of the resultant hydrogel was apparent. For example, rheological findings showed that storage modulus (G′) of the hydrogels could be tailored to a range between approximately 14,000 and 70,000 Pa by manipulating both of the aforementioned criteria. Equally striking variations in mechanical performance were observed using uniaxial tensile testing where reduction in PEGDMA content in the hydrogels resulted in decrease in both tensile strength and Young’s modulus values. Conversely, increases in the elongation at break values were observed as would be expected. Differential scanning calorimetry and dynamic mechanical thermal analysis showed that there was an increase in Tg with an increase in the molecular weight of PEGDMA. The relationship between the initial feed ratio, molecular weight of the macromolecular monomer and the subsequent mechanical properties of the hydrogels are further elucidated throughout this study.

Figure optionsDownload high-quality image (170 K)Download as PowerPoint slideHighlights
► Mechanical properties are dependent on monomer concentration and molecular weight.
► Tensile strength increases with addition of macromolecular monomer concentration.
► Storage modulus increases with macromolecular monomer concentration.
► Storage modulus increases with increasing molecular weight.
► Decrease in molecular weight increases glass transition temperature.