A high resolution Timing Counter for the MEG II experiment

The development of a Timing Counter detector designed for the MEGII upgrade of the MEG experiment, which strives to improve the sensitivity on the μ+→e+γ decay of an order of magnitude, is presented. It is based on two sets of counters (sectors) arranged on a semi-cylindrical structure; each sector consists of 256 counters. Each counter consists of tile of fast scintillator with a dual-side read-out based on SiPM arrays in series connection. The high granularity has two advantages: optimized size for achieving high resolution (75 ps) for the single counter, and a signal e+ crosses several counters, so that resolution improves by averaging multiple time measurements. A prototype has been built and tested both in BTF and PSI facilities in order to prove the multi-hit scheme in MEG-like beam conditions. A 35 ps resolution with eight hits has been obtained with a e+ beam at 100 kHz. The first sector will be tested in the MEG II pre-engineering run planned at the end of 2015.