Achromatic and isochronous lattice design of P2DT bending section in RAON accelerator

In RAON heavy ion accelerator, generally, the In-flight Fragmentation (IF) and Isotope Separation On-Line (ISOL) systems are employed in order to produce various isotope beams. Out of the isotope beams, the beams generated by the ISOL system are transported from the low energy linac SCL3 to the high energy driver linac SCL2. The post-accelerator to the driver linac transport (P2DT) section that consists of the charge stripper section, the 180° bending section, and the SCL2 matching section is placed between the SCL3 and the SCL2. In this P2DT section, however, the transverse and longitudinal emittance growth can aggravate the beam acceptance of the SCL2. Besides, the growth at the P2DT 180° bending section is considered a significant issue because of the unexpected achromatic effect. Therefore an achromatic and isochronous lattice design should be devised to prevent the transverse and longitudinal emittance from increasing while the multi-charge beams flow through the bending section. This study reports an improved design for the achromatic and isochronous lattice up to the second-order. After satisfying the first-order achromatic and isochronous condition by adjusting the field strength of quadrupoles with this design, the simple and efficient method will be utilized with the aim of getting the minimum number of sextupoles. The research on the collimator for the charge selection at the bending section will be also represented by using the designed lattice.