Influence of z-pin length on the delamination fracture toughness and fatigue resistance of pinned composites

The effect of z-pin length on the mode I and mode II delamination toughness and fatigue resistance of z-pinned carbon-epoxy composites is investigated. Experimental testing and mechanical modelling reveals that both the mode I fracture toughness and fatigue resistance increase with the z-pin length due to increased bridging traction loads generated by elastic stretching and pull-out of the pins. The opposite trend occurs for mode II toughness, which decreases with increasing z-pin length due to lower traction loads arising from restrictions on the shear-induced rotation and pull-out of the pins. The mode II fatigue resistance is increased by z-pinning, although it is not dependent on the z-pin length. Increasing the z-pin length beyond a critical size also changes the mode I and mode II delamination fracture and fatigue processes from single to multiple cracking. The effect of z-pin length on the delamination toughening and fatigue strengthening mechanisms is determined.