کد مقاله | کد نشریه | سال انتشار | مقاله انگلیسی | نسخه تمام متن |
---|---|---|---|---|
820566 | 1469548 | 2013 | 7 صفحه PDF | دانلود رایگان |
The adhesion strength between fiber reinforced composite (FRC) members and denture-base resin is pivotal for enhancing removable denture long lasting performance and patient comfort. FRC reinforcing rods based on glass fibers impregnated with light curing resin were used to model the FRC substructure. The influence of fiber architecture and adhesive layer composition on the shear adhesion strength, τa, between the FRC and denture-base resin was investigated both dry and in moist environment to assess the stability of the adhesive bond in the oral cavity. The obtained results suggest that for a given fiber architecture, adhesive composition and test conditions, the wetting of the FRC surface was the primary variable affecting the τa. In the case of good wetting and formation of adhesive bond between the substrates, interlaminar shear strength of the unidirectional FRC substrate was the limiting factor. In multidirectional FRC substrate, the shear strength of the outer resin rich layer was limiting factor for the maximum adhesion strength.
Journal: Composites Science and Technology - Volume 77, 22 March 2013, Pages 22–28