Effect of fiber, matrix and interface properties on the in-plane shear deformation of carbon-fiber reinforced composites

The effect of fiber, matrix and interface properties on the in-plane shear response of carbon-fiber reinforced epoxy laminates was studied by means of a combination of experiments and numerical simulations. Two cross-ply laminates with the same epoxy matrix and different carbon fibers (high-strength and high-modulus) were tested in shear until failure according to ASTM standard D7078, and the progressive development of damage was assessed by optical microscopy in samples tested up to different strains. The composite behavior was also simulated through computational micromechanics, which was able to account for the effect of the constituent properties (fiber, matrix and interface) on the macroscopic shear response. The influence of matrix, fiber and interface properties on each region and on the overall composite behavior was assessed from the experimental results and the numerical simulations. After the initial elastic region, the shear behavior presented two different regions, the first one controlled by matrix yielding and the second one by the elastic deformation of the fibers. It was found that in-plane shear behavior of cross-ply laminates was controlled by the matrix yield strength and the interface strength and was independent of the fiber properties.